XUNDA T 600 Polyethylene bitumen adhesive tape for pipe
XUNDA T 600 Polyethylene bituminous tape for protection of pipelines from Corrosion, Tapes for waterproofing of roofs, waterproofing of foundations, for basements and underground jobs, waterproofing of swimming pools
XUNDA T 600 Polyethylene bituminous tape Used for the anti-corrosion protection of buried or immersed pipes and fittings. Applied to weld joints, bends, bare pipe lengths and pipe fittings.
XUNDA T 600 Polyethylene bituminous tape Physical Properties
XUNDA T 600 Polyethylene bituminous tape- Application:
Prepare surfaces by removing all loose scale, rust or other foreign matter by grit blasting or wire brush. Surface must be clean, dry and free of grease.Apply thin film of Butyl Primer to all surfaces to be wrapped and allow to dry. Peel back interleaving and apply adhesive side of the tape to the surface and press down. Apply the tape spirally with enough tension to make it conform. Remove interleaving as wrapping proceeds. Overlap each turn by at least 1" or 55% to achieve double thickness.
Irregular surfaces such as valves, flanges, etc. may require the use of Mastic or Profiling Mastic. Refer to the product sheets for these specific
products for information on application and selection.
|Related Products :|